REVIEW: three filter air compressor maintenance methods: air compressor brands: Atlas, Ingersoll Rand, Sullair, Fu Sheng, Fidelity, CompAir and other air compressor three filter mainly refers to the air filters, oil filters, oil and gas separator. Routine maintenance for the life of the air compressor and maintenance costs have a great impact, Heriter  filter to remind you of three filter air compressor Paul ...

Three filter air compressor maintenance methods:

Air compressor brands: Atlas, Ingersoll Rand, Sullair, Fu Sheng, Fidelity, CompAir, etc.

Air compressor three filter mainly refers to air filters, oil filters, oil and gas separator. Routine maintenance has a great influence on the service life and maintenance costs, air compressors,

 Heriter  filter to remind you of three filter air compressor maintenance mainly note the following:

First, the intake air filter maintenance

 The air filter is to filter the air of dust, dirt components, and clean filtered air into the compression chamber of the screw rotor compressor. Due to internal screw clearance allows only particles within the filter 15u. If the air filter clogged damage, a large number of particles greater than 15u screw into circulation, not only greatly reduce the oil filter, oil fine separation of the core of life, but also lead to a large number of particles directly into the bearing cavity to accelerate the rotor bearing wear gap increases, compression efficiency is reduced, rotor boring even killed.

Second, the oil filter maintenance

Should be replaced with a new machine for the first time after 500 hours of operation oil core, with a special oil filter wrench to remove the anti-rotation, plus the best new filter Replace the front screw oil filter seal with both hands and twist back to the oil filter housing, tighten the. It recommends replacing the filter every 1500-2000 hours new, when an oil change is best at the same time to replace the oil filter, for use in harsh environments when the replacement cycle should be shortened. Non-super-term use of oil filters, otherwise due to the severe filter blockage, the pressure differential exceeds the boundaries of the bypass valve to withstand the bypass valve automatically opens, a lot of loot, random particles directly into the oil screw host, resulting in serious consequences. Diesel-moving screw machine diesel oil and diesel filter element filter element replacement should follow the maintenance requirements of diesel engine, similar to the way replace the screw core oil.

Third, the oil separator maintenance

Oil separator is a screw lubricant and air separating member, under normal operation, oil separator life of 3,000 hours, but the accuracy of the lubricating oil filter and air quality has a huge impact on their life. Visible in the harsh environment must be reduced air filter replacement cycle maintenance, even considering the installation of the pre-air cleaner. It must be replaced after more than 0.12Mpa. Otherwise it will cause motor overload, breakage run oil and gas separator.

Replacement: Remove the lid of the control of oil and gas fittings installed on. Remove the lid mounted on oil and gas projects into the barrel and gas return pipe, removed the oil barrel cover fastening bolts. Remove the oil barrel cover, remove the oil fine. Removing asbestos pads and dirt sticking to the cover plate. Put in a new oil and gas separator, note must be added to the upper and lower asbestos pad stapler nail set, when pressed asbestos pad must be placed neatly, otherwise it will cause red mat. AS Replace the cover and return pipe, each control tube and check for leaks.